Preparation

It is very important to ensure the surface is clean prior to installation. Use a microfibre cloth and surface cleaner such as Isopropyl Rubbing Alcohol. Wash your hands before installation to limit oily residue on the sticking surface of the vinyl. It is important to remove all dust particles as they may cause air pockets that will prevent the vinyl from sticking.

Remove from Packaging

The decal should arrive in a tube, remove and leave it on a flat surface at room temperature until it flattens.

Features

1. Removable Glue. Will not harm painted surfaces as long as paint surface is in good sound condition and free from any defects. Can be repositioned during installation with carefully using low temperature heat gun or wallpaper steamer or hair dryer and does not leave adhesive residue behind.
2. Flexible (Stretchable) with heat gun or hair dryer, Can be used on any interior or exterior smooth surfaces
3. Recommenced temperature to install the film is between 20^oC and 30^oC. 20^oC and 30^oC, If temperature is less than 20C during installation, film may tear off easily during installation. If temperature is too hot, film may melt down during installation.
4. Strong adhesion capability with bubble free installation
5. Water resistant
6. UV resistant
7. Stain-resistant and cleans easily with soap and water
8. PVC material
9. Lifespan: depends greatly on usage, but can be used 1-2 years on normal road use.
10. Safe to go through automated car wash